Here are some of our commonly asked questions. If you don’t find what you are looking for, simply fill out the form below and we’ll get back to you.
MOULD STOP’s Surface Cleaner Spray and Wipes contain a highly effective blend of sanitisers and surfactants for killing, cleaning and removing mould and bacteria, as well as leaves a protective coating on surfaces to help prevent future mould growth.
MOULD STOP’s Airborne Mould Control Gel evaporates into the air space and as it comes into contact with airborne mould and spores, it will kill mould on contact by interfering with its breathing process, providing continuous background protection against airborne mould and bacteria.
MOULD STOP Airborne Mould Control Gel can be used in any closed air environment where the air is recirculated. For example bedrooms, living areas, kitchens, bathrooms, laundries, garages, motorhomes, boats, baches and other enclosed spaces.
While it is suitable for use on a wide range of common surfaces, we recommend testing it on a small and inconspicuous area to ensure compatibility with the surface being cleaned. If damage occurs, do not continue.
MOULD STOP Surface Cleaner Spray and Wipes have a near-neutral pH, and are bleach and alcohol-free, making it suitable for use on a wide range of common surfaces.
MOULD Airborne Mould Control Gel is made from 100% natural plant-based ingredients, and the gel evaporates and disperses at less than 5 parts per million. It presents no known hazards toward people or pets.
For further information, please see the MSDS for the spray, wipes and gel.
All our products have a proven efficacy against various moulds and bacteria, successfully tested and validated. Please refer to the testing data for the products.
Most traditional cleaners and mould killers rely on harsh chemicals to eliminate mould and often fail to kill the spores, which results in mould growing again. These mould products may provide immediate relief, but fall short when it comes to long-term benefits, and usually require constant application.
MOULD STOP products are bleach and alcohol-free, and are proven to kill 99.9% of mould and spores. It leaves a protective layer on surfaces and provides background protection against airborne mould and spores, which helps to prevent further mould growth.
MOULD STOP kills the mould and bacteria that is the cause of the unpleasant odour. By eliminating the mould and bacteria, it in turn eliminates the musty, stale air smells.
After peeling off the film beneath the lid, open the number of vents on the lid required for the size of the area you are planning to use it in (each vent is suitable for areas up to 20 square meters). For instance, if you are using it in a 30 square meter area, you will need to open 2 vents on the lid.
Thereafter, place the pottle on any surface in the area near good airflow, as the gel requires air to flow over it to evaporate and spread it throughout the air space.
The gel provides continuous protection for between 6-8 weeks.
When the gel turns into a hard, nugget-like, brown piece, this means it is time to replace it to ensure continuous protection from mould, spores and bacteria.
